Motorola 7545MBW, User Manual

Page: 125 / 306

Configuration 3 - 57
Options
This tab allows you to tailor the double-click parameters, display, and data handling options associated with
your scanner.
Double Click Parameters
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the time between the first
and second clicks of the scanner trigger is within this time, it is considered a double-click. The allowable range
is 0 to 1000. A value of zero disables this feature.
A double-click produces different results depending on whether or not a value is assigned in the “Click Data”
parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the
target dot delay set in the “Dot Time” parameter and initiates a normal scan sweep. If a value is assigned for
the “Click Data” parameter, double-clicking the scanner trigger inserts the “Click Data” value rather than initi-
ating a scan.
Click Data
This parameter determines which character is sent to the application installed in your Omnii following a
double-click. A dialog box appears, asking that you press the key you want to insert. The ASCII/Unicode key
value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.
Display Parameters
Scan Result
When this parameter is enabled, the type of barcode and the result of the scan appear on the screen. Note that
this information is only displayed after a successful decode and is visible only while the scanner trigger is
pressed. When the trigger is released, this information is cleared from the screen.
Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display whenever the scanner is acti-
vated.
Scan Result Time (sec)
The value assigned to the Scan Result Time parameter determines how long the scan results of a successful
scan are displayed on the screen. Time is measured in seconds, and a value of 0 (zero) disables the param-
eter. When you choose this option, a dialog box appears where you can enter a value.