manualshive.com logo in svg

Motorola 7545MBW, User Manual

Share
Download
Motorola 7545MBW User Manual Download Page 197

Imager & Camera Settings

B - 5

Low Light

This preset is designed for very dark conditions such as inside a warehouse where the lights are kept low, or 
inside an unlit truck. This preset increases either the exposure time or the gain.

Low Power

This preset minimizes the use of the flash so as to conserve the battery power on the hand-held.

Glossy Surface

This preset minimizes the use of the flash so as to reduce reflection. This preset is used to read barcodes that 
are behind glass, or inside the plastic window of an envelope.

Image Capture Predefined Presets (Imaging Menu)

The following presets enable successful image capture in almost all conditions.

Default

This preset works in a wide range of conditions. It is optimized for a normal office lighting (about 300 Lux).

Motion

This preset uses a shorter exposure time so as to freeze motion.

Low Light Near

This preset is designed for dark conditions, it uses a longer exposure time and includes the flash.

Using the Imagers Applet

Configuring the Image Capture Presets (Imaging Menu)

To configure the image capture presets, open the dialog box as follows:

•

Tap  on 

Start>Settings>Control Panel

.

•

Tap on the 

Imagers

 icon, and if it’s not already selected, tap on the 

Imaging

tab.

The following screen is displayed.

NOTE

It is recommended that the default preset be used whenever possible.

Summary of Contents for 7545MBW



















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands