Motorola 7545MBW, User Manual, Page: 219 / 306

Scanner Settings C - 5
Decoded (Internal) Scanners
• Tap on the Scanner drop-down menu, and choose Decoded (internal) .
Options
Dot Time (msec)
The value selected for Dot Time (msec) determines (in milliseconds) how long the targeting dot remains on
before the scanner switches to a normal scan sweep. When you double-tap on this parameter, a dialog box is
displayed in which you can enter a value of
0 msec , 200 msec or 400 msec . A value of 0 (zero) disables the
target dot.
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the scan button or
trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value between 5 and 99. The
value is measured in tenths of seconds.
Decoded (Internal) Advanced Options
Scan Mode
You can set the method of scanning by setting this parameter to Scan beam only , Aim with Scan: 1 trigger pull ,
Aim with Scan: 2 trigger pulls , Aim with Scan on trigger release , and Continuous Scan Mode . Default is Scan
beam only .
Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser begins
sweeping. When you double-tap on this parameter, a dialog box is displayed in which you can enter a value
from
0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming-dot.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned off, once the
scanner trigger or button is released. This gives the scanner a minimum amount of time to complete its current
decode before the scan is cancelled when you quickly trigger on/off.
NOTE
Some options are available only for specific scanners. Refer to the option
names in this section for scanner model identification.