Motorola 7545MBW User Manual Download Page 81

Page: 81 / 306

Configuration

3 - 13

OBEX OPP (Object Exchange-Object Push Profile) Commands

The

OPP

defines two roles — a

Push Server

and a

Push Client

Push Server

is the device that provides an

object exchange server.

Push Client

is the device that pushes and pulls objects to and from the

Push Server

OBEX OPP

contains the following unique menu option:

•

Send File

displays an

Open File

dialog box where the file to be sent can be selected. When the transmis-

sion begins, another dialog box tracks the progress of the file transmission.

HSP/HFP (Headset Profile/Hands-Free Profile) Service Commands

The

HSP (Headset Profile)

allows users to connect their device to

Bluetooth

enabled headsets and other

audio devices.

HSP/HFP services

provide the following unique menu options:

•

Connect Audio

establishes an audio connection to the

Bluetooth

headset.

•

Disconnect Audio

disconnects the audio connection from the

Bluetooth

headset.

•

Volume Control

displays a dialog box where the headset and microphone volume can be adjusted.

Device

In this tab, users can discover and display

Bluetooth

devices.

Discovering and Removing Devices

Scan

discovers

Bluetooth

devices in range of the Omnii and lists them in this tab. Any existing devices previ-

ously discovered and listed will also be displayed.

Clear

removes all

Bluetooth

devices listed except those with currently paired and connected services.

NOTE

To limit the number of devices listed to a particular type of device, refer to

“Filter-

ing By Class of Device (COD)” on page 3-14

, next section.

Summary of Contents for 7545MBW



















































































































































































































































































































Search results

Summary of Contents for 7545MBW

Reviews:

Related manuals for 7545MBW

Brands by name

Popular brands

Motorola 7545MBW, User Manual

Search results

Summary of Contents for 7545MBW

Reviews:

Related manuals for 7545MBW

Brands by name

Popular brands