Moog CURLIN INFUSION PainSmart, User Manual

Page: 61 / 141

56
If a therapy is in progress, the date and time changing functions will
not be accessible until the therapy is complete. If “***ALERT***
DATE AND TIME CHANGE NOT ALLOWED” appears you will
need to go to CLEAR PATIENT DATA/Rx above date and time and
choose “enter” and the “YES” to clear “Pt data and Rx.” Then date
and time change will be allowed.
15. When BIOMED SETUP is complete, move the cursor to the “DONE?” field and press the
YES/ENTER key to return to the Program or Set-Up Menu Screen.
Program
Program/BioMed Setup Menu
To select “PROGRAM” use the arrow keys to move the cursor to the PROGRAM field and press
the YES/ENTER key. If no therapy is already programmed, a “Select Therapy Screen” appears
prompting you to select a therapy. If a therapy has been programmed, the following screen
appears:
Resume/Repeat Rx/New Program Menu
There are three different ways that you can start a therapy:
• RESUME: Should be used if a therapy is interrupted. The pump picks up where it left
off, and continues the therapy.
• REPEAT Rx: Should be used to hang a new bag and repeat the same therapy over again.
The infusion history displayed is reset (volume infused, boluses requested, boluses
received, etc). Shift Totals and Hourly Totals continue to accrue.
• NEW PROGRAM: Should be used to program a totally new Rx. All the therapy
parameters in the pump are set to factory default and must be re-entered by the
clinician.
The judicious choice of the option can help speed up programming. This screen gives you all
three options:
IMPORTANT
INFORMATION