Moog CURLIN INFUSION PainSmart User Manual Download Page 44

Page: 44 / 141

Hourly Total (HrlyTot):

The information displayed here includes the hourly Volume

(amount) Infused, the number of Bolus Given and the number of Bolus Asked. Within the

allocated 15 seconds, the user can scroll up or down the screen. Changes to this screen are not

allowed.

Therapy Information (ThrpyInfo):

The information displayed in this screen is from the

pre-prescription menu and includes Units, Concentration, Administration Route and Load

Dose. Changes to this screen are not allowed.

Rx Information (RxInfo):

This screen provides prescription menu information such as Basal

Rate, Patient Bolus, Bolus Interval, and Number of Bolus per Hour. Changes to this screen

are not allowed.

Hrly

Tot

Thrpy

Info

Lear

ning Pump

Summary of Contents for CURLIN INFUSION PainSmart














































































































































Search results

Summary of Contents for CURLIN INFUSION PainSmart

Reviews:

Related manuals for CURLIN INFUSION PainSmart

Brands by name

Popular brands

Moog CURLIN INFUSION PainSmart, User Manual

Search results

Summary of Contents for CURLIN INFUSION PainSmart

Reviews:

Related manuals for CURLIN INFUSION PainSmart

Brands by name

Popular brands