Moog CURLIN INFUSION PainSmart User Manual Download Page 47

Page: 47 / 141

Customized Lock Level setting

A customized

Moog Curlin Infusion

PainSmart

™

IOD pump may have a certain Lock Level value

set in the factory which is not the default OFF. It can be any one of these values: Lock Level 1, Lock

Level 2, or Lock Level 3.

The pump user is not allowed to change the customized factory programmed Lock Level

setting. If you attempt to change the customized Lock Level, the pump will display an alert,

“MODIFICATIONS NOT ALLOWED.”

LED Light Indicators

This three-light feature gives the user feed back on the current status of the pump.

Green

indicates a Running status of the pump and blinks approximately once every three

seconds when a therapy is in progress.

Yellow

indicates a Standby status of the pump and blinks while the pump is paused.

Red

indicates a Stopped or Alarm status of the pump and blinks whenever an alarm status

exists.

Green and Red

indicates an Infusion Complete Alarm status with KVO or a Down

Occlusion Alarm with automatic restart.

Yellow and Green

indicates a Standby status with automatic start. This occurs when a “0”

basal rate and bolus only is programmed.

Audio Indicator

An audible alarm or “beep” is used to alert you to a change in the status of the pump or a situation

requiring user action or notification. A message will appear on the display screen describing the

situation. The rate, number of beeps, and volume further specify status. This pump offers nine

different volume levels from which to select for the audio feature; however, the beep cannot be

totally disabled. The audio beep can be silenced for one-minute intervals by pressing the SILENCE

key except during an Error Code, at which time the alarm continues and the pump must be turned

off. The chapter of this manual, entitled “Troubleshooting,” includes tables with the alerts, alarms,

error codes, the conditions causing them, the message displayed on the screen, and the actions

required for resolution. If an alert or alarm occurs, please refer to these tables.

Summary of Contents for CURLIN INFUSION PainSmart














































































































































Search results

Summary of Contents for CURLIN INFUSION PainSmart

Reviews:

Related manuals for CURLIN INFUSION PainSmart

Brands by name

Popular brands

Moog CURLIN INFUSION PainSmart, User Manual

Search results

Summary of Contents for CURLIN INFUSION PainSmart

Reviews:

Related manuals for CURLIN INFUSION PainSmart

Brands by name

Popular brands