MOBA MOBA-Matic MMC-1000 User Manual Download Page 37

Page: 37 / 172

Structure and function

The principle of the averaging, which has already been

recognised by Sonic-Ski® plus will be acquired again by Big

Sonic-Ski®.

There will be up to 3 sensors assembled as divided on the

machine length - or even more by using a corresponding

mechanism - and electrically connected via a distribution box.

In exceptional cases, the averaging can also be acquired with

just two sensors (e.g. Sonic-Ski® plus front and rear).

After small unevenness and foreign bodies have already been

neutralised by the averaging for every individual Sonic-Ski®

plus, the Big Sonic-Ski® attachment now also additionally

averages and reduces bulges and small, drawn -out

differences in height in the longitudinal profile of the

subgrade.

Resulting road coating

A Sonic-Ski

Big Sonic-Ski

Resulting road coating

Summary of Contents for MOBA-Matic MMC-1000













































































































































































Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands

MOBA MOBA-Matic MMC-1000, User Manual

Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands