MOBA MOBA-Matic MMC-1000, User Manual

Page: 121 / 172

Operation
121
8.5.4 Controlling with the Digi Rotary Sensor (ground sensing))
Manual mode will
be switched back
to with the A/M
button. The
“AUTO” function
lamp is off.
Align the tool to the
working position for
the zero adjustment
with the UP/DOWN
buttons on the
controller or the
operator unit on the
machine.
The sensing ski
must apply slight
pressure on the
ground. This can
be set with the
counterweight.
Now press the Enter
key. In the event of
a brief press,
“SEt”
appears on the
display. The current
actual value is then
acquired as the
setpoint value.
If the button is
pressed for longer
than 1.5 seconds,
then the display
will change from
“SEt” to “0.0”. The
actual value and
the setpoint are
now set to zero.
Automatic mode will
be switched back to
with the A/M button.
The function lamp
“AUTO” is on.
The controller stops
the tool on the set
value.
Use the
UP/DOWN buttons
to amend the
setpoint value in
automatic mode to
be therefore able
to acquire
corrections.
Manual mode can
be switched back to
at any time with the
A/M button. The
automatic control of
the valve will
therefore be
switched off.
3)
4a)
1) 2)
6)
7)
4b) 5)
Ground