MOBA MOBA-Matic MMC-1000, User Manual

Page: 136 / 172

136
Operation
8.8.6 Switching from single sensor to Big Ski
The Big-Ski and the digital controller are assembled, the cables
are connected and the digital controller is supplied with voltage.
After the switch-on message has been issued, digital controller
indicates the sensor ID. If the message for the connected sensor
changes automatically after a short period of time to display the
actual value, then the system is ready for operation. If the Big -
Ski is being operated for the first time or its sensor combination
has been previously replaced, then the sensor ID must be
acknowledged by pressing a preferred button.
Otherwise execute sensor selection as described in Section
8.2.1 .
Is the sensor is selected as the active Big-Ski, lights up the
function lamp
“rope” of the digital controller.
The digital controller shows
the sensor ID (here:
averaging from Sonic-Ski
front and rear).
The digital controller
shows the sensor ID
(here: averaging from 3
sensors).
If the Big-Ski is
connected for the first
time or its sensor
combination has been
previously amended,
then the sensor ID must
be acknowledged by
pressing a preferred
button.
1a) 1b)
2)