MOBA MOBA-Matic MMC-1000 User Manual Download Page 31

Page: 31 / 172

Product description

4 Product description

The MOBA-Matic is a universal control and regulating system for

all types of construction machines.

The extensive range of sensors for distance and slope

measurement, the great comfort and a high level of operating

safety make the MOBA-Matic one of the most flexible and

efficient regulating systems for road pavers, concrete pavers,

mastic asphalt pavers, milling machine, caterpillar, kilvers and

graders.

The system is based on state-of-the-art microprocessor

technology and works with a so-called

“CAN-Bus” (Controller

Area Network).

This CAN-Bus creates the latest standard in automotive electrics

and guarantees the highest degree of system safety. It also

provides in its simplest form the central operation of the system

and, due to its modularity, its gradual expansion. So you can e.g.

easily retrofit new sensors, depending on the application

requirements, at any time.

The digital controller, the heart of the system, recognises the

connected sensors automatically when you turn it on.

In addition, total stations or GNSS receivers can be connected for

3D-control of the 3D-matic on the MOBA-Matic.

Summary of Contents for MOBA-Matic MMC-1000













































































































































































Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands

MOBA MOBA-Matic MMC-1000, User Manual

Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands