MOBA MOBA-Matic MMC-1000, User Manual

Page: 143 / 172

Operation
143
8.9.2 Assembling and setting up
General The following points must always be adhered to when assembling
the laser receiver:
There must be no obstacles (e.g. cable) in front of the sensor;
The laser transmitter and laser receiver must always have a
“free
view
” to each other;
Ideally assemble both at such a height that the rotating laser
beam can freely stretch over the roof of the machine.
There must not be any reflecting surfaces in the area of the laser
beam(windows, automotive glazing etc.);
In order to minimise the occurrence of reflections, it is advisable
to cover the laser transmitter to the actually required circular
section.
The specified operating range of the laser transmitter must not be
exceeded (observe environmental influences);
Working point
Set up a suitable laser transmitter
(wavelength between 600 and 1030 nm) in
accordance with this user manual at a
sufficient height in operation.
Set up the mast, on which the laser receiver is mounted,
vertically.