46
Operating and display elements, operating modes
The functionlamps:
The 4 function lamps of the controller have the following meaning:
(1) This signal status also occurs when the automatic for the
MOBA-Matic has been locked with the help of the function
“External Hand”. The valve outputs are then switched off and the
operation of the digital controller is inhibited.
The pin A and/or J (depending on the version of the digital
controller) can then be assigned with a defined signal in order to,
for example, interrupt in the controller status. Also refer here to
Section 11 in the
“Technical data” of this manual.
Automatic lamp
Lamp on:
Lamp flashes (1):
Lamp off:
Automatic mode;
Semi-automatic mode (only if this optional mode
has been pre-set by the dealer);
Manual mode;
Direction lamps (special function when working with Sonic -Ski)
If both lamps flash simultaneously, then an alarm condition has
occurred
String lamp
Lamp on:
Lamp off:
With Sonic-Ski plus
String mode active
Ground mode active
(Averaging)
With Big-Ski
Averaging from all 3
sensors
Only the middle sensor
will be evaluated
Summary of Contents for MOBA-Matic MMC-1000
