MOBA MOBA-Matic MMC-1000, User Manual

Page: 111 / 172

Operation
111
Use the UP/DOWN
buttons to amend
the setpoint value
in automatic mode
to be therefore able
to acquire
corrections.
Manual mode can be
switched back to at
any time with the A/M
button. The automatic
control of the valve
will therefore be
switched off.
Function not available
The function is not available when a Big-Ski is connected.
Operating variants
Adjustment and display of the setpoint value, depending on the
operating version, as different (also refer to Section 8.1.4
“Differences between the control variants” in this manual).
Sensitivity
If the system works in automatic mode too sluggishly, then the
sensitivity setting should be amended accordingly. (Refer to item
8.2.2 of this manual).
Control window
A control window is active when operating the digital controller
with the rotary sensor. The setting of the control window can be
read out under the item 8.2.5 of this user manual.
8)
9)