MOBA MOBA-Matic MMC-1000, User Manual

Page: 88 / 172

88
Operation
The variable for the symmetry around the working point of the
control window is adjustable.
The setting will be executed, depending on the physical measuring
unit for the distance measurement, in 0.1 cm, 0.1 inch or 0.01 feet
increments.
The set value for the control window describes a range around the
working point; i.e. when a half a set value is once above and one
below the working point.
(Example: 6 cm control window = +/- 3 cm around the working
point)
Setting the control window
Simultaneously
actuate the A/M
button and the
Enter button
several times.
… until the display
between the symbol
for the control window
setting
and the last
set value (preset
“OFF” - is also
deactivated) switches
back and forth.
By pressing the
UP or DOWN
button, this
variable for the
control window
will be increased
or reduced (here:
setting to the
value
“8.0”[ ± 4.0 cm])
Working mode will
be switched back
to by actuating the
A/M button. If no
button is actuated,
then the controller
automatically
switches back to
this position after 5
seconds.
W orking point
Control
window
+1/2 adjusting value
-1/2 adjusting value