MOBA MOBA-Matic MMC-1000 User Manual Download Page 103

Page: 103 / 172

Operation

103

Mounting

direction

Ground

sensing

The Sonic-Ski® plus must be operated longitudinal to the

direction of travel of the machine (averaging) for ground sensing.

Mounting

direction

String line

sensing

The Sonic-Ski® plus must be operated laterally to the direction of

travel of the machine for string line sensing. Align the sensor at

the centre of the string.

In order to display the string under the sensor heads of Sonic -

Ski® plus in the display as lateral, the sensor must be built in on

both sides in such a way that so it is represented as in the sensor

symbol i.e. Respectively with the connecting plug to the left (as

seen in direction of travel).

The string will only initially be recognised as a reference point

with a diameter of 3 mm.

Moving direction

Summary of Contents for MOBA-Matic MMC-1000













































































































































































Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands

MOBA MOBA-Matic MMC-1000, User Manual

Search results

Summary of Contents for MOBA-Matic MMC-1000

Reviews:

Related manuals for MOBA-Matic MMC-1000

Brands by name

Popular brands