MOBA MOBA-Matic MMC-1000, User Manual

Page: 59 / 172

Installation and commissioning
59
The Big Sonic-Ski® junction box
The junction box should be mounted in such a way that simple
wiring to the controller and the sensors is possible. The
connections for the sensors should always point downwards so
that no water can penetrate into the junction box. Inputs which
are not required must be sealed with dust protection caps.
The input plug connector should always ideally point in the
direction of travel.
Using an M6 x 12 hexagon socket screws (1), the junction box (2)
will be initially assembled on the mounting plate (3).
Then the mounting plate (3) will be assembled using a M8 star
knob screw (4) to one of the central sliding brackets (5).
When assembling the Big Sonic-Ski® on the right-hand side of
the machine, the box should be assembled on the inside of the
support mechanics so that the input plug connector also points in
the direction of travel in this instance. Then slide the
corresponding sliding bracket, on which the junction box is to be
assembled, from the inside towards the outside on the support.