MOBA MOBA-Matic MMC-1000, User Manual

Page: 141 / 172

Operation
141
If the button is
pressed for longer
than 1.5 seconds,
then the display
will change from
“SEt” to “0.0”. The
actual value and
the setpoint are
now set to zero.
Automatic mode will
be switched back to
with the A/M button.
The function lamp
“AUTO” is on.
The controller stops
the tool on the set
value.
Use the
UP/DOWN buttons
to amend the
setpoint value in
automatic mode to
be therefore able
to acquire
corrections.
Manual mode can
be switched back
to at any time
with the A/M
button. The
automatic control
of the valve will
therefore be
switched off.
Operating variants
Adjustment and display of the setpoint value, depending on the
operating version, as different (also refer to Section 8.1.4
“Differences between the control variants” in this manual).
Sensitivity
If the system works in automatic mode too sluggishly, then the
sensitivity setting should be amended accordingly. (Refer to item
8.2.2 of this manual).
Control window
A control window is active when operating the digital controller
with the rotary sensor. The setting of the control window is
described under the item 8.2.5 .
6) 7) 4b) 5)