Mitsubishi QJ71GP21-SX, Reference Manual

Page: 248 / 650

8
- 3 8.1 Program Example of Single Network System
8.1.2 Setting and communication contents
8
PROGRAMMING
(1) Setting of control station (No. 1)
(a) Quantity setting
1) Considering the quantity setting
Consider the quantity setting with the parameter sheet. ( Appendix 5.2
Quantity setting)
2) Parameter setting
Complete settings in GX Developer based on the contents filled in the
parameter sheet.
Figure 8.4 Example for filling in quantity setting parameter sheet (Control station (No. 1))
Figure 8.5 Quantity setting (Control station (No. 1))
Network type
Item
CC IE Control (Control station) CC IE Control (Control station)
CC-Link IE controller network module
CC IE Control (Normal station)
No. No.
Network No.
Group No.
Starting I/O No.
Total stations
(For the control station only)
Station No.
Mode
Station No. setting method
On line
Off line
H/W test
Self-loopback test
Circuit test (for the control station only)
Test between station
Specify station No. by parameter.
Specify station No. by program.
On line
Off line
H/W test
Self-loopback test
Circuit test (for the control station only)
Test between station
Specify station No. by parameter.
Specify station No. by program.
CC IE Control (Normal station)
(Range: 1 to 239)
(Range: 2 to 120)
(Range: 0 to 32)
(Range: 1 to 120)
(Range: 0000H to 0FE0H) (Range: 0000H to 0FE0H)
(Range: 1 to 239)
(Range: 2 to 120)
(Range: 0 to 32)
(Range: 1 to 120)
(For the control station only)