7
- 34
7.6 File Transfer Function (FTP)
7
COMMUNICATION USING BUILT-IN ETHERNET
PORTS OF CPU MODULE
mls
[Function]
Saves the names of files stored in the Built-in Ethernet port QCPU as log
data in a file on the FTP client side.
[Specification format]
mls Transfer source drive name:\ Transfer destination path name
[Specification example]
When saving the names of files stored in the SRAM card to the
S990901F.LOG file
mls1:\S990901F.LOG
[Note]
• Specify "\" immediately after the transfer source drive name.
• Specify the transfer source drive name when specifying the transfer
destination file path name (FTP client side).
• When the transfer destination file path name is not specified, the file is
saved using a file name determined by the FTP application on the FTP
client side.
• The transfer destination is on the current directory of which when FTP is
started up and connected to the server.
[Similar function] mdir
mput
[Function]
Writes a file to the Built-in Ethernet port QCPU.
To write multiple files, specify the file names and extensions within the file
path name using a wild card (* and/or ?).
When writing multiple files, send status is checked for each file transfer.
[Specification format] mput Transfer source file path name
[Specification example] When writing all files whose extensions are "USR"
mput*.USR
[Note]
The save destination file name is the same as that on the FTP client side.
The transfer destination is the memory in which the parameter files used
during the current operation are stored.
