manualshive.com logo in svg

Mitsubishi Q00CPU, User Manual

The Mitsubishi Q00CPU user manual is a comprehensive guide that provides detailed instructions for operating and troubleshooting this advanced product. Available for free download at manualshive.com, this manual ensures easy access to valuable information, empowering users to maximize the capabilities of their Mitsubishi Q00CPU.

Share
Download
background image

A

 - 16

6.13 Execution Time Measurement•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6 - 92

6.13.1 Program list monitor •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6 - 92
6.13.2 Interrupt program monitor list ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6 - 98
6.13.3 Scan time measurement ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6 - 99

6.14 Sampling Trace Function •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 104

6.15 Multiple-user debugging function •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 120

6.15.1 Simultaneous monitoring execution by multiple users ••••••••••••••••••••••••••••••••••••••••••••••6 - 121
6.15.2 Simultaneous online change by multiple users•••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 124

6.16 Watchdog Timer (WDT) ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 126

6.17 Self-diagnostics Function•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 129

6.17.1 Interrupt due to error occurrence••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 140
6.17.2 LED display at the time of error occurrence•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 142
6.17.3 Error Clear •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 142

6.18 Error History•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 144

6.18.1 Basic model QCPU ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 144
6.18.2 High Performance model QCPU, Process CPU, Redundant CPU, Universal model QCPU

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 145

6.19 System Protect •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 146

6.19.1 Password registration •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 147
6.19.2 Remote password ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 150

6.20 CPU Module System Display by GX Developer •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 156

6.21 LED Display •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 161

6.21.1 Method to turn off the LED •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 162
6.21.2 Priority setting•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 163

6.22 High Speed Interrupt Function ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 166

6.22.1 High speed interrupt program execution•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 168
6.22.2 High speed I/O refresh, high speed buffer transfer ••••••••••••••••••••••••••••••••••••••••••••••••••6 - 170
6.22.3 Processing times •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 173
6.22.4 Restrictions ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 175

6.23 Interrupt from the Intelligent Function Module••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 178

6.24 Serial Communication Function •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 179

6.25 Service Processing ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 187

6.25.1 Module service interval time read •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 187
6.25.2 Service processing•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 189

6.26 Device Initial Value ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 196

6.27 Battery life-prolonging function ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 201

6.28 Memory Check Function••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 203

6.29 Latch Data Backup Function (to Standard ROM)••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 208

6.30 Write/Read Device Data to/from Standard ROM ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••6 - 213

CHAPTER7 COMMUNICATION USING BUILT-IN ETHERNET PORTS OF CPU MODULE

7 - 1 to 7 - 49

7.1

Communication specifications••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••7 - 2

7.2

GX Developer/GOT Connection •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••7 - 3

Summary of Contents for Q00CPU

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Q00CPU

YASKAWA P1000 Quick Start Manual preview
P1000
Brand: YASKAWA Pages: 256
7bit Synapse Instruction Manual preview
Synapse
Brand: 7bit Pages: 2
Jafar 5220 Operation And Maintenance Manual preview
5220
Brand: Jafar Pages: 15
Danfoss VLT HVAC Operating Instructions Manual preview
VLT HVAC
Brand: Danfoss Pages: 85
Danfoss VLT Decentral FCD 300 Operating Instructions Manual preview
VLT Decentral FCD 300
Brand: Danfoss Pages: 112
Danfoss AME 55QM Datasheet preview
AME 55QM
Brand: Danfoss Pages: 4
Danfoss VLT 6000 series Manual preview
VLT 6000 series
Brand: Danfoss Pages: 27
Danfoss AME 20 Operating Manual preview
AME 20
Brand: Danfoss Pages: 16
Danfoss AK-PC 420 User Manual preview
AK-PC 420
Brand: Danfoss Pages: 20
Danfoss ADAP-KOOL AK-PC 781 User Manual preview
ADAP-KOOL AK-PC 781
Brand: Danfoss Pages: 14
Danfoss 4033 Installation And User Instructions Manual preview
4033
Brand: Danfoss Pages: 12
Danfoss 102 Installation & User'S Instructions preview
102
Brand: Danfoss Pages: 12
Danfoss vlt soft starter mcd 500 Operating Manual preview
vlt soft starter mcd 500
Brand: Danfoss Pages: 96
Eaton ePDU G3 Installation & Quick Start Manual preview
ePDU G3
Brand: Eaton Pages: 2
Eaton ePDU G3 Manual preview
ePDU G3
Brand: Eaton Pages: 2
Eaton PowerXL DX-NET-ETHERCAT-2 Instruction Leaflet preview
PowerXL DX-NET-ETHERCAT-2
Brand: Eaton Pages: 3
IDK SWC-2000 User Manual preview
SWC-2000
Brand: IDK Pages: 96
Rane ZR1 Datasheet preview
ZR1
Brand: Rane Pages: 2

Brands by name

Popular brands

Load more brands