Mitsubishi FX2-16E series, User Manual

Page: 403 / 520

FX
3U
Series Programmable Controllers
User’s Manual - Hardware Edition
395
19 FX3U-7DM (Display Module)
19.7 Monitor/Test Mode [Excluding User-Registered Devices]
11
Hi
gh
-Speed
Counters
12
O
utput W
iri
ng
13
W
iri
ng for
V
ari
ous
Us
es
14
Te
st R
un,
Mai
nten
ance, T
roubl
es
hooti
ng
15
IInput/Output Pow
ered
Exte
nsi
on U
nit
s
16
Input/O
utput
Extens
ion
Bl
ock
s
17
Extension Power Suppl
y
Un
it
18
Other Extens
ion
Uni
ts an
d
Opti
ons
19
D
isplay M
od
ule
20
Te
rminal
Bl
oc
k
1
Use the [+] / [-] buttons to select the desired setting method (refer to table below), then press [OK]
to register this selection.
2
Use the [+] / [-] buttons to determine the setting value.
The content that is changed varies according to the selected setting method, as shown below.
- For "direct setting" or "direct s index register" method:
Use the [+] / [-] buttons to change the value as desired, then press [OK] to register the changed
value.
- For "indirect setting" or "indirect s index register" method:
Use the [+] / [-] buttons to change the device No. as desired, then press [OK] to register the
setting value.
6) After the setting operation is completed, return to the "test subject selection screen", where the [ESC]
button can then be pressed to return to the "monitor screen".
Selectable Setting Values
Changeable
Content
Setting Description
Direct setting (without index modifier)
[Direct (K,H)]
Direct
numeral
setting
The directly specified value becomes the setting
value.
Direct setting (with index modifier)
[direct (K,H) + index register (V0 to V7, Z0
to Z7)] The [directly specified numeicral value] + [index
register’s current value] becomes the setting
value.
Indirect setting (without index modifier)
[data register (D), extended register (R)]
Indirectly
specified
device No.
The specified device’s current value becomes the
setting value.
Indirect setting (with index modifier)
[data register (D) + index register (V0 to
V7, Z0 to Z7)],
[Extended register (R) + index register (V0
to V7, Z0 to Z7)]
The [directly specified device No.] + [index
register’s current value] becomes the device No.
specified by the setting value. That device’s
current value becomes the setting value.