FX
3U
Series Programmable Controllers
User's Manual - Hardware Edition
38
2 Features and Part Names
2.2 Names and Functions of Parts
2.2.2
Sides
[1]
Cover of special adapter
connector
Remove this cover, and connect the 1st special adapter to the connector
(when the expansion board is installed).
When the expansion board is not installed, the connector is not provided.
[2]
Cover of high-speed input/
output special adapter
connector
Remove this cover, and connect the first high-speed input special adapter
(FX
3U
-4HSX-ADP) or high-speed output special adapter (FX
3U
-2HSY-
ADP) to the connector. When the communication/analog/CF card special
adapter is connected, this connector is not used.
[3]
Expansion board securing
screw holes (2 places)
These holes are designed to secure the expansion board with screws
(supplied with the expansion board). The expansion board dummy cover
is fitted before shipment. Remove the dummy cover, and fit the board.
[4]
Nameplate
The product model name, control number and power supply
specifications are shown.
→
For details on the manufacturer's serial number,
refer to Subsection 5.1.1.
[5]
DIN rail mounting groove
The unit can be installed on a 35 mm (1.38") wide DIN46277 rail.
Left side
[1] Cover of special adapter
connector
[2] Cover of high-speed input/output
special adapter connector
[3] Expansion board securing
screw holes
Right side
[4] Nameplate
[5] DIN rail mounting groove
Summary of Contents for FX2-16E series
Page 2: ......
Page 8: ... 6 Safety Precautions Read these precautions before use MEMO ...
Page 519: ......
