Mitsubishi FX2-16E series, User Manual

Page: 180 / 520

FX
3U
Series Programmable Controllers
User’s Manual - Hardware Edition
172
9 Preparation for Wiring and Power Supply Wiring Procedures
9.2 Cable Connecting Procedures
9.2.2 Input/output connectors
The input/output connectors of FX
2N
Series input/output extension blocks (connector type) and special
function units/blocks (connector type) conform to MIL-C-83503.
Prepare the input/output cables, referring to the following tables.
1. Applicable products
2. Preparation of input/output connectors
1) Compliant connectors (commercially available connectors)
Use 20-pin (1-key) or 40-pin (1-key) sockets conforming to MIL-C-83503.
In advance, make sure that no interference is caused with peripheral parts, such as the connector cover.
2) Input/output cables (our options)
Input/output cables with attached connectors are available.
The following input/output cables are intended to be used only for general purpose input and output
operations.
3) Connectors for making input/output cables by users (our options)
The users should prepare the electric wires and pressure bonding tool.
4) Certified connectors (commercially available connectors)
Connectors made by DDK Ltd. shown in item 3).
Classification Model names
Input/output extension blocks FX
2N
-16EX-C, FX
2N
-16EXL-C, FX
2N
-16EYT-C
Special function units/blocks FX
3U
-20SSC-H, FX
3U
-2HC, FX
2N
-10PG, FX
2N
-10GM, FX
2N
-20GM
Model names Length Description Shape
FX-16E-500CAB-S 5m(10’4") General-purpose input/output cable
• Single wire (Wire color : red)
• PLC side : A 20-pin connector
FX-16E-150CAB 1.5m(4’11")
Cables for connecting FX Series terminal
block and input/output connector
For the connection with FX Series terminal
block, refer to the following chapter.
→
Chapter 20 "FX-16/32E*-*-
TB (Terminal Block)"
• Flat cables (with tube)
• A 20-pin connector at both
ends
FX-16E-300CAB 3m(9’10")
FX-16E-500CAB 5m(10’4")
FX-16E-150CAB-R 1.5m(4’11")
• Round multicore cables
• A 20-pin connector at both
ends
FX-16E-300CAB-R 3m(9’10")
FX-16E-500CAB-R 5m(10’4")
FX-A32E-150CAB 1.5m(4’11")
Cables for connecting A Series Model
A6TBXY36 connector/terminal block
conversion unit and input/output connector
type
• Flat cables (with tube)
• PLC side :
Two 20-pin connectors in 16-
point units
• Terminal block side :
A dedicated connector
• One common terminal covers
32 input/output terminals.
FX-A32E-300CAB 3m(9’10")
FX-A32E-500CAB 5m(10’4")
Model name and composition of input/output connector
Applicable electric wire (UL-1061 are
recommended) and tool
Our model name
Details of part
(made by DDK Ltd.)
Electric wire size
Pressure bonding tool
(made by DDK Ltd.)
FX
2C
-I/O-CON for
flat cable
10-piece set
Solderless connector FRC2-
A020-30S
AWG28 (0.1mm
2
),
1.27 pitch, 20-core
357J-4674D: Main body
357J-4664N: Attachment
FX
2C
-I/O-CON-S
for bulk wire
5-piece set
Housing HU-200S2-001
Solderless contact HU-411S AWG22 (0.3mm
2
)
357J-5538
FX
2C
-I/O-CON-SA
for bulk wire
5-piece set
Housing HU-200S2-001
Solderless contact HU-411SA AWG20 (0.5mm
2
)
357J-13963
FX-I/O-CON2-S
for bulk wire
(40 Pin)
2-piece set
Housing HU-400S2-001
Solderless contact HU-411S AWG22 (0.3mm
2
)
357J-5538
FX-I/O-CON2-SA
for bulk wire
(40 Pin)
2-piece set
Housing HU-400S2-001
Solderless contact HU-411SA AWG20 (0.5mm
2
)
357J-13963