Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 446 / 548

WARNING
l Mount the wheel with the valve stem (I)
facing outboard. If you cannot see the
valve stem (I), you have installed the
wheel backwards.
Operating the vehicle with the wheel in-
stalled backwards can cause vehicle dam-
age and result in an accident.
7. Turn the wheel nuts clockwise by hand
to initially tighten them.
Temporarily tighten the wheel nuts by
hand until the flange parts of the wheel
nuts make light contact with the wheel
and the wheel is not loose.
CAUTION
l
Never apply oil to either the wheel bolts or
the nuts, or they will tighten too much.
NOTE
l If all 4 aluminium wheels are changed to
steel wheels. e. g. when fitting winter tyres,
use tapered nuts.
8. Lower the vehicle slowly by rotating the
wheel nut wrench anticlockwise until the
tyre touches the ground.
9. Tighten the nuts in the order shown in
the illustration until each nut has been
tightened to the torque listed here.
Tightening torque: 88 to 108 N•m
How to change a tyre
9-21
OGGE17E1
For emergencies
9