Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 239 / 548

By pulling the regenerative braking level se-
lector, the brake force (amount of electrical
energy to charge the drive battery) can be ad-
justed according to the driving condition such
as before a curve or a downhill.
The regenerative braking level can be switch-
ed in 6 levels from B0 (small regenerative
braking force) to B5 (large regenerative brak-
ing force).
increase in
regenerative force decrease in
regenerative force
CAUTION
l If a large regenerative brake force is applied
on a slippery road, tyres may skid. Always
drive safely in accordance with the prevail-
ing road condition.
l If you operate the right and left paddles si-
multaneously, the regenerative brake force
level may not change.
NOTE
l
Repeated continuous operation of a paddle
will continuously change the brake force
levels.
l If you turn on the cruise control when the
level B0 or B1 (smaller regenerative brake
force) is selected, the level is returned to the
normal level B2 automatically.
l When stronger regenerative braking is gen-
erated, the stop lamps will illuminate even
when the brake pedal is not depressed.
l Under the cruise control, the level B0 or B1
cannot be selected. The buzzer sounds if you
try to select these levels.
l On vehicles with the adaptive cruise control
system (ACC), you cannot control the regen-
erative brake force level while the adaptive
cruise control system (ACC) is operating.
The buzzer sounds if you operate the pad-
dles.
To decrease generative force
Each time you pull the + (UP) paddle to-
wards you, the regenerative brake force low-
ers by one level.
Regenerative braking level selector (paddle)*
7-20
OGGE17E1
Starting and driving
7