Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 267 / 548

A- SPEED LIMITER ON/OFF switch
To turn on/off the Speed Limiter.
B- SET - switch
To set the current vehicle speed to a set
speed decrease the set speed.
C- RES + switch
To resume the Speed Limiter with set
speed memorized or increase the set
speed.
D- CANCEL switch
To cancel the Speed Limiter.
NOTE
l Press the switch one by one.
l
The Speed Limiter may be cancelled auto-
matically, if two or more switches are press-
ed at the same time.
Speed Limiter information on
the multi information display
area
E00633401037
The Speed Limiter information is displayed
on the multi information display area in the
combination meter.
A- Control state
There are 3 control states as below.
LIMIT OFF
When the Speed Limiter is in
STANDBY, the vehicle speed can ex-
ceed the set speed
LIMIT
When the Speed Limiter is in opera-
tion. The vehicle is controlled in order
not to exceed the set speed.
OVER LIMIT
When the vehicle speed is exceeding
the set speed by more than about
3 km/h (2 mph)
B- SPEED LIMITER ON indication
When the Speed Limiter is started up,
the Speed Limiter’s symbol appears.
C- Set speed
Set speed appears if it is stored.
To start up
E00633501025
First of all, press the ON/OFF switch in order
to power up the Speed Limiter when the op-
eration mode in ON.
The Speed Limiter indication will be ap-
peared in the combination meter.
Speed Limiter*
7-48
OGGE17E1
Starting and driving
7