Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 23 / 548

You can shift the selector lever to “B” only
when the select position is in the “D”
(DRIVE) position.
Selector lever positions
“P” PARK
The wheel are locked. When you park your
vehicle, be sure to apply the parking brake
and press the electrical parking switch.
“R” REVERSE
This position is to back up.
“N” NEUTRAL
No power is transmitted to the wheels. The
wheels are not locked.
“D” DRIVE
This position is for normal driving.
“B” REGENERATIVE BRAKE
This position is for the regenerative braking.
You can adjust the regenerative braking force
up to two levels.
Refer to “Selector lever (Joystick type)” on
page 7-16
Multi information display
E08501201284
Always stop the vehicle in a safe place before
operating.
The following information is included on the
multi information display: odometer, tripme-
ter, average fuel consumption etc.
1- mark display screen
®
p. 6-10
2- Information screen
®
p. 6-06
Interrupt display screen
®
p. 6-09
3- Drive battery level display screen
®
p. 6-10
4- Odometer
®
p. 6-11
5- Door ajar warning display screen
®
p. 6-10
Refer to “Multi information display” on
page 6-03.
EV switch
E08502400026
When you press the switch, you can drive the
vehicle using only the EV drive mode as
much as possible, even if the accelerator ped-
al is roughly depressed.
“EV switch” on page 7-25
Quick guide
1-20
OGGE17E1
Overview
1