Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 332 / 548

However, the vehicle may hit the truck be-
cause the body of the truck strays onto the
course in reality. When approaching to solid objects
The reference lines for distance and vehicle
width are intended to indicate the distance to
a flat object such as a level, flat road surface.
This may make the distance to a projecting
object shown on the screen differ from the
actual distance to the projecting object. Do
not use them as a guide for distances to solid
objects.
Example: Example: On the screen the point B
appears the nearest, then the point C and A in
order of distance. The points A and B actual-
ly are the same distances from the vehicle,
and the point C is farther off than the points
A and B.
Side-view mode
E00646100060
Reference lines for the vehicle width and the
front end of the vehicle are displayed on the
screen.
1- Approximate vehicle width including the
door mirror.
2- Approximate location of the axle centre
of the front wheel.
3- Approximate 50 cm from the front edge
of the front bumper.
Multi Around Monitor*
7-113
OGGE17E1
Starting and driving
7