Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 168 / 548

2. Lightly press the multi information dis-
play switch to select " " (operation
sound setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from ON (operation sound on)
to OFF (operation sound off), or from
OFF to ON.
The setting is changed to the selected
condition.
NOTE
l The operation sound setting only deactivates
the operation sound of the multi information
display switch and rheostat illumination but-
ton. The warning display and other sounds
cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
E00523501702
The time until the display appears can be
changed.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “ALARM” (rest
time setting).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to display “ALARM”.
4. Lightly press the multi information dis-
play switch to select the time until the
display.
5. Press and hold the multi information dis-
play switch for about 2 seconds or more,
the setting is changed to the selected
time.
NOTE
l The drive time is reset when the operation
mode of the power switch is put in OFF.
Changing the turn-signal sound
E00529100396
It is possible to change the turn-signal sound.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select (changing the
turn-signal sound).
3. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from 1 (turn-signal sound 1) to
2 (turn-signal sound 2), or from 2 to 1.
The setting changes to the selected turn-
signal sound.
Returning to the factory set-
tings
E00523601921
Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi information dis-
play switch for about 2 seconds or more
to switch from the setting mode screen
to the menu screen.
Refer to “Changing the function set-
tings” on page 6-16.
2. Lightly press the multi information dis-
play switch to select “RESET” (return-
ing to the factory settings).
3. When you press and hold the multi in-
formation display switch for about 5 sec-
onds or more, the buzzer sounds and all
of the function settings are returned to
the factory settings.
NOTE
l The factory settings are as follows.
Multi information display
6-21
OGGE17E1
Instruments and controls
6