Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 282 / 548

NOTE
l Pressing the switch turns off the ACC even
if it is engaged.
l The set speed is cancelled when the ACC is
turned off or the operation mode is set to
“OFF”.
l If the ACC is in the ‘ON state’ when the op-
eration mode is set to “OFF”, the system is
set to the ‘OFF state’ when the operation
mode is set to “ON” next time.
To resume the control
After cancelling the ACC control (i.e. placing
the system in the ‘standby state’) by pressing
the “CANCEL” switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
“RES
+
” switch.
NOTE
l The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
To change the following dis-
tance setting
Every time you press the following distance
setting switch, the setting changes sequential-
ly through three options “Long”, “Middle”
and “Short”, cycling back to “Long” after
“Short”. The distance setting is reset when
the operation mode is set to “OFF” or when
the ACC is set to “OFF,” and is automatically
set to “long” when you set the ACC to “ON”
next time.
NOTE
l The following distance varies as a function
of the speed; the faster the set speed, the lon-
ger the following distance.
Following distance setting: “Long”
Following distance setting: “Middle”
Following distance setting: “Short”
To activate cruise control (auto-
matic speed control)
If you hold the “ACC ON/OFF” switch
pressed with the operation mode set to “ON”
and the ACC in the ‘OFF state’, the cruise
control is activated. The information screen
of the multi-information display then changes
to the cruise control screen and a buzzer
sounds at the same time.
Cruise control is turned off if you set the op-
eration mode to “OFF”.
Adaptive Cruise Control System (ACC)*
7-63
OGGE17E1
Starting and driving
7