Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 236 / 548

The “B” (REGENERATIVE BRAKE) posi-
tion can only be selected while the select po-
sition is in the “D” (DRIVE) position. When
the selector lever is moved to the “B” posi-
tion, the regenerative brake force will be-
come stronger.
When the selector lever is again moved to the
“B” position, the maximum regenerative
brake force will be used.
To return to the “D” position, use the selector
lever to select the “D” position.
NOTE
l If you operate the selector lever to “B” twice
too quickly, the regenerative brake force
may not become the maximum.
WARNING
l Do not replace the selector lever knob
with anything other than a MITSUBISHI
MOTORS genuine part. In addition, do
not hang an object on the selector lever as
it may be the cause of an accident.
l When you shift the selector lever to “D”
or “R” position, always depress the brake
pedal with your right foot for your safety.
Never shift the lever while depressing the
accelerator pedal. Doing so will start your
vehicle abruptly, which may lead to a seri-
ous accident. It may also be a cause of
failure of the vehicle.
NOTE
l You cannot operate the regenerative brake
while the adaptive cruise control system
(ACC) is operating.
l Every time while operating the selector lev-
er, be sure to check the position displayed on
the indicator.
l If you perform the following operation, the
buzzer may sound and the select position
may automatically shift to the “N” (NEU-
TRAL) position.
• If the electrical parking switch is pressed
while the vehicle is in motion.
• If the selector lever is moved to the “R”
(REVERSE) position while the vehicle is
moving forward.
• If the selector lever is moved to the “D”
(DRIVE) position while the vehicle is
moving backward.
• If the selector lever is moved to the “B”
(REGENERATIVE BRAKE) position af-
ter it had been shifted to the “R” (RE-
VERSE) position.
l If you perform the following operation, the
buzzer sounds and the selector lever opera-
tion is cancelled.
• When in the “P” (PARK) position, the se-
lector lever is moved without depressing
the brake pedal.
• When in the “P” (PARK) or “N” (NEU-
TRAL) position, the selector lever is
moved to “B” (REGENERATIVE
BRAKE).
NOTE
• When the operation mode is in the “ON”
position with the Plug-in Hybrid EV Sys-
tem not operated, the selector lever is
shifted to the “D” (DRIVE) or “R” (RE-
VERSE) position.
l If you shift and hold the selector lever for
approximately 10 seconds or longer, the
buzzer sounds.
The buzzer stops sounding when you release
the selector lever.
l If the driver’s door is opened while the vehi-
cle is stopped or is running at very low
speed with the select position in other than
the “P” (PARK) position and the READY
indicator in the meter is illuminating, the
buzzer sounds. The buzzer stops sounding if
you close the door or shift the selector lever
to “P” (PARK).
Selector lever (Joystick type)
7-17
OGGE17E1
Starting and driving
7