Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 122 / 548

Move the seat belt anchor down with the lock
knob (A) depressed. To move the anchor up,
slide it without depressing the lock knob (A).
Anchor down
Anchor up
WARNING
l When adjusting the seat belt anchor, set it
at a position that is sufficiently high so
that the belt will make full contact with
your shoulder but will not touch your
neck.
Rear-centre 3-point type seat
belt
E00405201184
The rear-centre 3-point type seat belt must be
worn correctly as illustrated.
AA0111461
WARNING
l Be sure to securely connect the both latch
plate (A and B). Failing to do so could sig-
nificantly reduce the amount of protection
and cause serious injures in a collision or
a sudden stop.
NOTE
l If the seat belt buckles in the rear seating po-
sition are not found, you will find them un-
der the rear seat cushion.
Refer to “Making a luggage area” on page
5-07 for how to put the seat belt buckles at
the proper position.
To fasten
1. Pull out the buckle (C) from the seat-
back.
2. Pull out the small latch plate (A) and
then pull out the latch plate (B) by tilting
it as shown in the illustration.
NOTE
l
Pulling out the latch plate by force may
damage the headliner.
3. Pull the seat belt and insert the small
latch plate (A) into the buckle (C).
Seat belts
5-13
OGGE17E1
Seats and seat belts
5