Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 118 / 548

CAUTION
l To make a flat seat, stop the vehicle in a safe
place.
l Make sure the seat is adjusted by an adult or
with adult supervision for correct and safe
operation.
l Do not walk around on top of the seats after
they have been laid flat.
l To ensure the seats are locked securely, at-
tempt to move them back and forth.
l Do not jump on, or impact the seatbacks
heavily.
l To raise the seatback, put a hand on the seat-
back and raise slowly. Never have a child do
this operation, or an unexpected accident
may result.
1. Remove the head restraints from the
front seats, raise the armrest and remove
the cargo area cover. (Refer to “Head re-
straints” on page 5-05, “Armrest” on
page 5-05 and “Cargo area cover” on
page 8-85)
2. Slide the front seats fully forward, then
recline the seatbacks backwards to ach-
ieve a flat surface. (Refer to “Front
seats” on page 5-03)
3. Recline the rear seatbacks backwards.
(Refer to “Rear seats” on page 5-05)
4. The flat seat configuration is now com-
plete. Reverse the above procedures
when returning the seat to the normal
position.
Seat belts
E00404800867
To protect you and your passengers in the
event of an accident, it is most important that
the seat belts be worn correctly while driving.
The front seat belts have a pretensioner sys-
tem. These belts are used the same way as a
conventional seat belt.
Refer to “Seat belt pretensioner system and
force limiter system” on page 5-15.
Seat belts
5-09
OGGE17E1
Seats and seat belts
5