Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 24 / 548

Battery save mode switch
E08502500027
Pressing the switch, the engine will start in
order to preserve the remaining power of the
drive battery and the vehicle will operate in
the series hybrid mode or the parallel hybrid
mode depending on the remaining power in
the drive battery.
“Battery save mode switch” on page 7-27
Battery charge mode switch
E08502600028
Pressing the switch when the READY indica-
tor is illuminated, the engine will start to
charge the drive battery to nearly full.
“Battery charge mode switch” on page
7-28
S-AWC (Super-All Wheel Con-
trol)
E08501900082
S-AWC is an integrated vehicle dynamics
control system that helps enhance driving
performance, cornering performance, and ve-
hicle stability over a wide range of driving
conditions through integrated management of
the twin motor 4WD, the AYC (Active Yaw
Control), the ABS and the ASC.
4WD lock switch
The drive mode can be switched to “4WD
LOCK” by pressing the switch while the op-
eration mode of the power switch is in the
“ON” position. The “4WD LOCK” mode im-
proves the driving stability on a wet road sur-
face or a snowy road, etc.
“S-AWC (Super All Wheel Control)” on
page 7-21
Quick guide
1-21
OGGE17E1
Overview
1