Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 173 / 548

Screen Cause Solution (Reference)
l Charging was interrupted due to poor con-
nection of the charge cable or power fail-
ure. l Connect the charge cable correctly.
Refer to “Normal charging” on page 3-10.
Refer to “Quick charging” on page 3-16.
l If charging is interrupted due to a power
failure, charging will be automatically re-
sumed when the power is restored.
l The drive battery temperature is too cold. l When the vehicle is under running, stop
the vehicle in a safe place and contact a
MITSUBISHI MOTORS Authorized
Service Point.
l When the vehicle is parked during the
daytime, wait for the outside temperature
to rise and re-start the Plug-in hybrid sys-
tem once the outside temperature has ris-
en.
Refer to “Cautions and actions to deal
with intense cold” on page 2-11.
l Charging lid is open. l Close the charge lid.
Refer to “Charging from rated AC
220-240 V outlet” on page 3-12.
l EV priority mode is not available because
the drive battery level is low.
l Refer to “EV switch” on page 7-25.
Indication lamp, warning lamp, and information screen display list
6-26
OGGE17E1
Instruments and controls
6