Mitsubishi MOTORS Outlander PHEV 2017, Owner'S Manual

Page: 55 / 548

NOTE
l When connecting or disconnecting the nor-
mal charge connector, insert/pull out the
connector straight.
Also, do not incline or twist the connector.
Doing so could cause a bad connection or
malfunction.
l Make sure to lock the doors to prevent theft,
etc. during charging.
l Do not push the rear portion of the charging
lid when the charging lid is locked.
There is a possibility that the charging lid
opens unexpectedly when the doors are un-
locked while using the central door locks,
keyless entry system or keyless operation
function.
Charging from rated AC
220-240 V outlet
E08301001280
1. Firmly apply the parking brake, press the
electrical parking switch to shift into the
“P” (PARK) position and put the opera-
tion mode of the power switch in the
“OFF” position.
2. Unlock the driver’s door to unlock the
charging lid.
3. Push the rear portion of the charging lid
(A) until it clicks, and open the charging
lid.
NOTE
l The charging lid is unlocked in conjunction
with unlocking of the driver’s door as the
following condition.
• The operation mode is put in “OFF” or
“ACC”.
• The selector lever position is “P”
(PARK).
l When the charging lid cannot be unlocked
even if the driver’s door is unlocked. Open
the charging lid manually by using the re-
lease lever inside of the interior trim in the
luggage compartment.
Refer to “If the charging lid cannot be un-
locked” on page 3-16.
4. Press the tab (B) to open the inner lid
(C).
WARNING
l It could cause electric leak, a fire or elec-
tric shock by entering water or dust into
the normal charge port.
l Do not touch the metal terminal of the
normal charge port (D) and the normal
charge connector.
Doing so could cause an electric shock
and/or malfunction.
NOTE
l There is a hole on the charge port for water
drainage. If this hole is blocked and water
gets trapped in the charge port, do not
charge. Please contact a MITSUBISHI
MOTORS Authorized Service Point.
l If the charge port is frozen, melt the ice us-
ing a hair drier. Forcing the charge connec-
tor to connect while frozen could result in
malfunction.
Normal charging (charging method with rated AC 220-240V outlet)
3-12
OGGE17E1
Charging
3