Troubleshooting
223
Other
Audio Functions
Message
Cause
Response
Play is impossible due to a mechanism error.
The drive has malfunctioned for some reason.
Check that there is no problem with the disc, and insert
the disc again. If the problem persists, consult with your
dealer.
The disc is damaged or warped.
Do not insert a damaged or warped disc.
Play is impossible due to low battery voltage.
The vehicle's battery voltage has dropped.
Check the battery.
Cannot be played.
Check the disk.
A disc is inserted that cannot be played.
Insert a disc that can be played.
→
“Types of Disc That Can Be Played Back” (P86)
The disc is inserted upside down.
Insert with the label side up.
The disc has condensation on it.
Wait a while before inserting again.
The disc is dirty.
Clean the read surface of the disc.
Play is impossible due to high temperatures.
The temperature inside the product is high.
Remove the disc, and wait for the internal temperature
to return to normal.
This iPod cannot be played.
Authentication failed.
Reconnect your iPod.
The connected iPod has an unsupported format and
cannot be recognized.
Use an iPod that supports this product.
(P8)
This iPod software version is not correct.
Please use the latest version software.
This USB memory cannot be played.
Authentication failed.
Reconnect the USB device.
No data that can be played.
There are no audio
fi
les that can be played back.
Add audio
fi
les that can be played.
→
“Audio Files(MP3/WMA/AAC/WAV)”(P87)
An iPod not containing any tracks has been
connected.
Connect an iPod containing tracks.
Cannot be played.
Unsupported audio
fi
les have been played.
Con
fi
rm audio
fi
les that can be played.
→
“Audio Files(MP3/WMA/AAC/WAV)”(P87)
Copyright protected
fi
les have been played.
Copyright protected
fi
les cannot be played.
Use
fi
les that are not copyright protected.
The audio
fi
le is corrupted.
Add uncorrupted audio
fi
les.
The SD card in the USER slot could not be written.
Check the SD card.
The SD card in the user slot is in the “Lock” state and
cannot be written.
Take out the SD card from the user slot and unlock the
“Lock”.