3-77
Installing the hand output cable
3Installing the option devices
Note : Please see the hand output cable from the arm cover A (2) <4> side, and store it outside the bracket. If the
cable enters within the bracket, it will rub to the timing belt and will become the cause of breaking down.
Fig.3-15 ： Storing of the hand output cable
5) Install the No.2 arm cover <2> and arm cover A (2) <4> as before. Be careful not to catch any the cables.
6) Connect to the solenoid valve of customer preparation the hand output cable taken out from No.2 arm cover
<2>
The installation of the hand output cable is completion above.
Bracket
Cable should be stored in
outside of the bracket.
Ａ
View from A
(Arm cover A(2) <4> side)
