Mitsubishi Electric R410A, Service Handbook

Page: 126 / 346

[6-3 Making the Group and Interlock Settings from an ME Remote Controller ]
- 117 - HWE14080 GB
6
Test Run
6-3 Making the Group and Interlock Settings from an ME Remote
Controller
6-3-1 Overview
6-3-2 Address Registration
Make the following settings to perform a group operation of units that are connected to different outdoor units or to manually set up the
indoor/outdoor unit address.
(A) Group settings...........Registration of the indoor units to be controlled with the remote controller,
and search and deletion of registered information.
(B) Interlock settings........Registration of LOSSNAY units to be interlocked with the indoor units,
and search and deletion of registered information
[Normal display]
Register the indoor unit to be controlled with the remote controller.
Bring up either one of the following displays on the remote controller:
The blinking display of HO, which appears when the power is turned on, or the
normal display, which appears when the unit is stopped. The display window must
look like one of the two figures below to proceed to the next step.
1
[Blinking display of HO ]
ON/OFF
SET TEMP.
PAR-F27MEA-US
FILTER
CHECK TEST
CLOCK ON OFF MODE TIMER FAN SPEED
LOUVER VENTILATION
AIR DIRECTION
TIMER SET
?
A
F
D
B
H
G
C
E