Mitsubishi Electric NZ2GF-ETB, User Manual

Page: 124 / 254

122
(2) Changing the IP address of the external device and gateway address setting
Change the IP address of the external device according to the system configuration. In addition, configure the
gateway address setting in the external device so that IP communications from the external device transmit
through the Ethernet adapter module.
For the gateway address, set the IP address of the Ethernet adapter module (Ethernet part).
When the external device is a personal computer, set the IP address of the Ethernet adapter module (Ethernet
part) in the default gateway. When the default gateway has been already set, use the route command to set the
communication route where communications for the request destination transmit through the Ethernet adapter
module.
External device
(request source
device)
Configuration of the external device
External device
(request destination
device)
Ethernet adapter module
(request source side)
Ethernet adapter module
(request destination side)
QJ71GF11-T2
Master station
Station No.1 Station No.2
Network No.1
Network No.3 Network No.2
Network No.1
Basic software: Microsoft Windows XP Professional Operating System
R R
192.168.3.1 192.168.2.1
192.168.3.30
(Set in the configuration tool)
192.168.2.30
(Set in the configuration tool)
192.168.1.1
(Automatically assigned)
192.168.1.125
192.168.1.2
(Automatically assigned)
Ethernet
CC-Link
IE Field
Network
IP address