Mitsubishi Electric NZ2GF-ETB, User Manual

Page: 194 / 254

192
The following table lists the setting items on the dialog box.
Set the CC-Link IE Field Network gateway setting in the request source that accesses a different network address. (

Page 129, Section 7.3.7 (2))
Item Description Setting range
IP Address Input Format Set the input type for the IP address and subnet mask pattern.
DEC/HEX
(Default: DEC)
Ethernet
IP Address
Configure the setting for the station on CC-Link IE Field Network, where the external
device of the request destination is connected, so that communications reach the
external device.
• Set the IP address and subnet mask pattern of the request destination in "Ethernet".
• Set the station where the IP packet transmits through last in "CC-Link IE Field Network
Gateway Setting Station".
• Up to eight communication routes can be set.
• Pressing the
 key moves the focus.
• When setting the communication route to all the IP addresses starting with 192.160.10
• When setting the communication route to the IP address of 192.160.10.21
• Decimal input
0.0.0.1 to 223.255.255.254
(Default: none)
• Hexadecimal input
0.0.0.1 to DF.FF.FF.FE
(Default: none)
Subnet
Mask
Pattern
• Decimal input
192.0.0.0 to 255.255.255.255
(Default: none)
• Hexadecimal input
C0.0.0.0 to FF.FF.FF.FF
(Default: none)
CC-Link IE Field
Network Gateway
Setting Station
Network
No. 1 to 239
(Default: none)
Station No.
0 to 120
(Default: none)
[  ] [  ] button
These buttons are used to change the priority for communication routes set in "Ethernet"
and "CC-Link IE Field Gateway Setting Station".

CC-Link IE Field
Network Default
Gateway Setting
Network
No. Set the station on CC-Link IE Field Network, where communications transmit through to
reach the request destination.
This setting is used to communicate with an external device that does not exist in
"Ethernet" or "CC-Link IE Gateway Setting Station".
(Default: none)
Station No. (Default: none)
Request
source
Request
destination
Station where the IP packet passes through last
(Network No. , station No. )
To transmit communications to the request destination ,
the IP packet passes through the station with the network
address No. and station No. .
Ex.
Enter 0
in the 4th octet. Enter a number
in the 4th octet.