Mitsubishi Electric NZ2GF-ETB, User Manual

Page: 131 / 254

129
CHAPTER 7 COMMUNICATION OF THE ETHERNET ADAPTER MODULE
7
7.
3
IP
Co
mm
uni
ca
tions
over
CC-
Li
nk
I
E
F
ield
Net
w
ork
(I
P
P
a
cket
T
rans
fe
r F
unct
ion)
(2) CC-Link IE Field Network gateway setting
For an external device having a different network address to receive communications, configure the setting in the
station on CC-Link IE Field Network connected to the request destination. (

Page 191, Section 10.3.2 (1))
Setting item tree

NZ2GF-ETB

[Parameter Setting]

"CC-Link IE Field Network"

button
• Setting for 
• Setting for

: Because the network address of

is the same, communications reach the external device
of

using the routing parameters. Thus the CC-Link IE Field Network gateway setting is not required.
Ex.
1 2
192.168
.3.1
192.168
.3.30
192.168
.1.1
192.168
.1.125
192.168
.2.1
10.97
.4.2
Station No.2:
192.168
.1.2
Station No.0:
192.168
.2.125
Ethernet
IP address
CC-Link
IE Field
Network
10.97
.4.1
Network No.1
Master station (station No.0)
External device External device
Local station
(station No.2)
Master station
(station No.0)
Station
No.1
Station No.1
Network No.2
Network No.3
Different network addresses