49
CHAPTER 5 SYSTEM CONFIGURATION
5
5.
2 Net
w
ork Compo
nent
s
5.2
Network Components
The following shows network components.
5.2.1
CC-Link IE Field Network
For network components of CC-Link IE Field Network, refer to the following.
User's manual for the master/local module used
5.2.2
Ethernet
(1) Cables
Use the 1000BASE-T or 100BASE-TX compliant Ethernet cables.
(a) Recommended products
Ethernet cables meeting the 1000BASE-T or 100BASE-TX standard are available from Mitsubishi Electric
System & Service Co., Ltd. (Cable catalogs are also available.)
Connectors can be customized to the specified length. Please consult your local Mitsubishi service
representative.
Remark
●
Cable types
The following types are available depending on the operating environment.
• Standard type: Cables used in control panels or indoors
• L type: Cables for outdoor connections
Special cables, such as flame-retardant or water-tight cables, and relay adapters are also available. Please consult your
local Mitsubishi Electric System & Service Co., Ltd.
●
For order or inquiry on the cables: Mitsubishi Electric System & Service Co., Ltd.
www.melsc.co.jp/business
Communicat
ion speed
Ethernet cable
Connector
Standard
1Gbps
Category 5e or higher,
(STP) Straight cable
RJ45 connector
Cables that meet the following standards:
• IEEE802.3(1000BASE-T)
• ANSI/TIA/EIA-568-B(Category 5e)
100Mbps
Category 5 or higher,
(STP) Straight cable
RJ45 connector
Cables that meet the following standards:
• IEEE802.3(1000BASE-T/100BASE-TX)
• ANSI/TIA/EIA-568-B(Category 5)
Type
Model (manufacturer)
Ethernet cable
SC-E5EW series (Mitsubishi Electric System & Service Co.,
Ltd.)
Summary of Contents for NZ2GF-ETB
