Mitsubishi Electric NZ2GF-ETB, User Manual

Page: 228 / 254

226
*1 The extension name is listed below.
(2) System information
SD50 Error clear
Error code to
be cleared
The error code to be cleared is stored. U
SD53
DC DOWN
detection
DC DOWN
detection
count Every time the input voltage of the Ethernet adapter module drops to 65% of the rated voltage
(DC power), the stored value is incremented by one.
The counter repeats cycles of 0

32767

-32768

0.
S
(Error)
SD
n
SD
n+1
Extension
name
File type
Upper 8 bits Lower 8 bits Upper 8 bits
51
H
50
H
41
H
QPA Parameter
Number Name Description Details
Set by
(Set timing)
SD200 Switch status
Ethernet
adapter
module switch
status
The switch status of the Ethernet adapter module is stored.
0: RUN
1: STOP/RESET S
(Switch
change)
SD201 LED status LED status
The LED status of the Ethernet adapter module is stored.
0: Off
1: On
2: Flashing
1) ERR.
2) D LINK
3) RD
4) SD
5) MODE
6) RUN
(In the offline mode, RD and SD are always off.)
S
(Status
change)
SD203
Operating
status Operating
status
The operating status of the Ethernet adapter module is stored.
1) Operating status
0: RUN
2: STOP
2) Cause of STOP
The latest cause of the change in the operation status is stored.
0: STOP switch
1: Master station STOP
2: Remote operation from GX Works2, etc.
4: Error
S
(Status
change)
Number Name Description Details
Set by
(Set timing)
b15 b12b11 b8 b7 b4 b3 b0
1) 2) 3) 4) 6) 5)
0 0 0 0
to to to to
b15 b12b11 b8 b7 b4 b3 b0
1) 2)
0 0 0 0 0 0 0 0
to to to to