Mitsubishi Electric Melsec WS Series, User Manual

Page: 53 / 142

Data sets
MELSEC-WS
50
4.3 Default settings for the input data set 1
In the delivery status, the input data set 1 of the Ethernet interface module is pre-
configured.
The following table gives an overview which bytes are assigned to the default
configuration and how the data are modularized.
Byte Default assignment Input data set
0 Logic result 0
#1
(50 bytes)
1 Logic result 1
2 Logic result 2
3 Logic result 3
4 Module 1 input
5 Module 2 input
6 Module 3 input
7 Module 4 input
8 Module 5 input
9 Module 6 input
10 Module 7 input
11 Module 8 input
12 Module 9 input
13 Module 10 input
14 Module 11 input
15 Module 12 input
16 Module 1 output
17 Module 2 output
18 Module 3 output
19 Module 4 output
20 Module 5 output
21 Module 6 output
22 Module 7 output
23 Module 8 output
24 Module 9 output
25 Module 10 output
26 Module 11 output
27 Module 12 output
28 to 35 Not assigned
36 to 47 Not assigned
48 to 49 Not assigned
The default byte assignment can be freely customized as will be described in the
following section.
Table 18:
Default configuration for
the input data set 1
transmitted into the
network