Mitsubishi Electric Melsec WS Series, User Manual

Page: 16 / 142

MELSEC-WS
On safety
13
Pay attention to the safety notes and safety measures on the Ethernet
interface module!
If the device is used for any other purposes or modified in any way - also during
mounting and installation - any warranty claim against Mitsubishi Electric
Corporation shall become void.
 When mounting, installing and using the Ethernet interface module, observe the
standards and directives applicable in your country.

The national/international rules and regulations apply to the installation,
commissioning, use and periodic technical inspection of the MELSEC-WS safety
controller, in particular:
– EMC directive 2004/108/EC,
– Provision and Use of Work Equipment Directive 89/655/EC,
– the work safety regulations/safety rules.

This manual must be made available to the operator of the machine where the
MELSEC-WS safety controller is used. The machine operator is to be instructed
in the use of the device by qualified safety personnel and must be instructed to
read the manual.
 Since an Ethernet interface module is powered from the CPU module, connect a
Class 2 power supply or a Class 2 transformer in accordance with UL310 or
UL1585 to the CPU module.
The MELSEC-WS safety controller fulfils the requirements of Class A
(industrial applications) in accordance with the “Interference emission”
basic specifications.
The MELSEC-WS safety controller is therefore only suitable for use in an
industrial environment and not for private use.
ATTENTION
Note
ATTENTION