Mitel MiVOICE BUSINESS, Engineering Manualline

Page: 51 / 381

Typical Configurations
37
CX/CXI CONTROLLER
FEATURE/
RESOURCE
VALUE/QUANTITY NOTES
RTC processor 266 MHz This processor is listed as 300 MHz in the Engineering Tool.
Memory (RAM) 512 MB
IP Users and
Devices (Including
SIP Users) 100 Up to 16 IP devices may be connected directly to the powered
Ethernet ports on the front of the CXi cabinet.
Maximum 100 IP users.
TDM Devices 150 ONS devices only. DNIC devices are not supported on the CX.
Total Devices 150
ACD users
(active agents) 50 To install the maximum number of ACD users will require the
maximum number of digital trunks and DSP resources.
Echo canceller
channels/
IP gateway (E2T) 10 (default)
64 (max)
Echo cancellation is done in one DSP for the basic system. The
addition of more DSP devices can add another 10 channels, and each
T1/E1 combo module provides 32 channels of hardware echo
cancellation. (See Table 19 on page 54 for complete details.)
Conference
channels 30 Conference channels in the CX are allocated based on the number of
available DSP devices at start-up. The base system will have 9
channels (e.g. three 3-party conferences) and larger systems will
have 30 channels. Each conference may have up to eight members,
but the total cannot exceed the allowed maximum.
Voice Mail 16 The maximum allowed number of voice mail ports is also fixed by the
number of DSP devices installed. The base system allows up to 4
ports and, with increased DSP resources, up to 16.
Compression
channels 64 G.729a compression is not a standard offering on base systems.
Additional DSP resources are needed to achieve the values shown.
Compression is added in blocks of 8 bi-directional channels on Quad
DSP and DSP II modules only.
T.38 16
Record-a-Call 8 Every Record-a-Call session uses a conference resource and a voice
mail session from the available pool. The maximum number of
simultaneous sessions supported is 8, but may be limited to less than
this by the available resources.
CIM ports 3 One Quad CIM card can be installed, but only the first 3 ports will be
functional.
ASUs supported 3 Up to 3 external ASU and ASU II cabinets can be installed.
LS trunks (in ASU) 36 Up to 12 on internal AMB/AOB, and 24 in external ASU.
IP networking yes The system can support a maximum of 2000 programmed IP trunks,
but the number which can be used at any one time will be limited by
other resources.
Page 1 of 2