Mitel MiVOICE BUSINESS, Engineering Manualline

Page: 109 / 381

Power
95
AC POWER ADAPTERS
For information on AC power adapters, refer to the appropriate Mitel phone data sheet.
5550-TKB
(5550 IP
Console) No Yes No No No No No
5560 IPT Yes No No Yes Yes Yes Yes
Navigator Yes No Yes Yes Yes Yes Yes
TeleMatrix
3000IP Yes No
(Note 1)
Yes Yes Yes Yes Yes
Gigabit
Ethernet Phone
Stand No No
(An AC to
48VDC
power
adapter is
provided
with this
unit)
No Yes
(Power Hub
must
support
Gigabit
Ethernet
and must
be 802.3af
compliant)
No Yes (Notes
2 and 3)
Yes
Wireless LAN
Phone Stand No No
(An AC to
48VDC
power
adapter is
provided
with this
unit)
No No No No No
UC360 See Note 4 No No No No No Yes
Note 1: Refer to TeleMatrix 3000IP Technical documentation for details.
Note 2: For some IP Phone accessories or modules, the total power is not compatible with 802.3af LAN powering.
For details refer to the Gigabit Ethernet Installation Guide .
Note 3: Because Gigabit Ethernet wiring uses all cable pairs only Phantom 802.3af power can be used with the
Gigabit Ethernet Stand. Gigabit Ethernet End-span and Mid-span powering devices can be used if they are IEEE
802.3af compliant. Phantom power can be supplied over pairs (1, 2) and (3, 6) or over pairs (4, 5) and (7, 8).
Note 4: The UC360 must be powered from an IEEE 802.3at compliant PoE source, for details refer to the UC360
Engineering Guidelines.
Note: The standard 24 VDC power adapter has a 10 ft. (3 m) output power cord. If a
longer output power cord is required, you can use Part Number 57004243 (universal
AC input and output, 24 VDC, 15 ft. (4.5 m) power cord.
Table 32: IP Phone Power Options (continued)
PHONES
IN-LINE
ETHERNET
AC POWER
ADAPTER (48
VDC LAN)
AC
POWER
ADAPTER
(24 VDC)
POWER
DONGLE
(CISCO-C
OMPLIANT
)
802.3AF
MID-SPAN
POWER
HUB 802.3AF
SPARE
PAIR
POWER
802.3AF
SIGNAL
(PHANTOM
) PAIR
POWER 802.3AB
(LLDP-MED
SIGNALLIN
G)
SUPPORT
Page 2 of 2