Mirapoint RazorSafe 700, Hardware Manual

Page: 60 / 98

Replacing Appliance Components
54
2
Figure 26 Removing and Installing the Riser 2 Board
5. Remove the expansion-card riser board:
a.
Using a Phillips screwdriver, remove the securing screw from the assembly
(
Figure 26 ).
b. Slide the riser board off of the four securing tab hooks.
c. Lift the riser board from the bracket.
Installing the Riser 2 Board on the Expansion-Card Bracket
To install the riser 2 board on the expansion-card bracket:
1. Place the riser board in the expansion-card bracket so that the four tab hooks
are fully inserted through the tab slots on the riser board (
Figure 26 ).
2.
Slide the riser board into the tab hooks.
3. Using a Phillips screwdriver, secure the board with the Phillips screw.
4. Reinstall expansion-card riser 2. See Installing Expansion-Card Riser 2 on
page 52.
5.
Install all expansion cards in the expansion-card slots. See Installing an
Expansion Card on page 48.
6. Close the appliance. See Closing the Appliance on page 30.
7. Reconnect your appliance and peripherals to their electrical outlets, and power
on the appliance.
1 expansion-card bracket 2 tab hook (4)
3 tab slot (4) 4 riser 2 board
5 screw
5
1
4
3
2